Our First Investment Property: Here’s What You Need to Know
Thinking of buying your first investment property? Read what it is REALLY like in this all-encompassing guide to house flipping for beginners TL;DR – HGTV is a big old liar

FLIP HOUSE:
Everything We Learned About Flipping A House (The Hard Way)
Flip a house, they said. It’ll be fun, they said.
Will it though?

Don’t get me wrong. Beverly is beautiful. We worked hard on her. We cut NO corners and truly spared no expense.
But we had a lot of hard lessons along the way.
Hard lessons that cost us a lot of money.
Related Read: How To Flip A House With No Money
But hopefully what we learned will be something that can help you if you’re looking to flip a house for the first time and you want to be a few steps ahead of us by learning from our mistakes!
What We Learned
Always crawl the crawl space

What you can’t see will always get you. When we first saw Beverly, although she was to’ up from the flo’ up (literally), she did actually have floors (for the most part).
Which means we couldn’t see beneath. But “it’ll be fine!”
Spoiler alert: It wasn’t fine.
90% of the floor joists and 75% of the band sill had been eaten up with termites which meant all of that had to be replaced.
Why is that important?
Because our $7000 framing budget then turned into $24,000. Just like that.
Timeline is very important
People will tell you that time is money, but when. it comes to flipping a house, it’s especially true.
For one reason, it costs money to hold a house. Depending on the type of lending you’re using, every day adds interest.
Another reason people don’t think about is cost of materials.

When we created our flip house design plans and looked at our materials, it was November of 2020.
We were under contract for 60 days, didn’t start for another month after that because of shopping our funding options, and then finally swung a first hammer in February.
In that short time, materials went up.
For example, our electric cost went up 250%.
TWO. HUNDRED. AND. FIFTY. PERCENT.
Location is everything
We said no to a lot of houses before we finally took the plunge on this one.

The reason this was such an easy yes was because of location. It’s very close to our quaint little downtown, in one of the most established neighborhoods and also very close to Winthrop University.
It was perfect which meant we knew there was a huge desire for people to want to be here which helped us feel confident it would sell to the right buyers.
Always factor in a contingency
This is also known as your “oh sh!t” budget.
As a general rule, you want to always add 10-20% over what you think it’s going to cost.
So that way if your framing budget that was supposed to be $7000 turns into $24,000, you’re prepared.
I’m not saying it won’t hurt (because BOY, DOES IT HURT) but you’re prepared.
Get used to making quick decisions
Depending on what kind of decision maker you are, this will be the easiest or hardest part for you.
Jordan is a decision agonizer and draws out and overthinks everything. I’m a researcher, but when I’ve made a decision, I’m confident and ready to rock and roll.

For example, there was an opportunity for us to procure some awesome LVP flooring, but because we (*ahem* Jordan) didn’t move fast enough, we lost it and and had to pivot.
I love the floors that we actually chose, but still.
Shop wholesale suppliers
We are lucky enough to have a large number of wholesale suppliers who sell things at a deep discounted rate which saved us THOUSANDS.

We were able to get doors for both the front and the side door that retail right now at Home Depot for $700 plus.
We paid $175 a piece! That’s a huge savings.
Can’t make up all the missed money, but it sure can help!

We were going to tear down this shed, but instead painted it and put nice handles on it and it looks like an entirely new shed!

We were going to tear down this fireplace. It was awkward, felt like it broke up the space in a weird way and we couldn’t figure out how to configure the kitchen.

Instead we kept it and then wrapped it in shiplap which I LOVE!
When it comes to projects, just keep an open mind!
What We Would Do Again
Vinyl siding

At first we were super opposed to vinyl and wanted hardiplank.
However, we needed vinyl because we were encapsulating asbestos siding and vinyl was recommended because nails would hold better.
So we did what the experts told us to do and are so pleased with it.
LVP flooring
Super happy with install. Super happy with the look. Super happy with all of its incredible qualities.
We would absolutely put LVP floors in our own house if we didn’t already have white oak hardwood floors in our own home.
Shop wholesale suppliers
We saved so much money doing this and we also were able to support local shops around here which we loved.
Spend money in the kitchen

We spent a lot of money in the kitchen.
A huge portion of our budget.
But the layout of a kitchen and its size are super important to the resale of a home and so we wanted to make sure that the future owners had a space that was functional and also had decent storage even though the house was on the smaller side.
Floating shelves in the laundry room

We have done open shelving in our kitchen and we also added wall to wall open shelves in our laundry room and we are super happy with it.
This was way better than the gross wire shelves that most people remove anyway and it was a super budget friendly DIY project! We got lots of compliments on these as well!
Unique lighting

Choosing sconces in a bathroom instead of a vanity light was something that we thought a buyer would love or hate.
But we loved it.

We also chose to add a chandelier over the vanity as opposed to a vanity light in the guest bathroom and would for sure do that again!
Pot filler and range hood

Always. Absolutely always
10/10. 5 stars. Would recommend.
What We Would Have Done Differently
Gutters
The original house had crown molding on the outside that was then boxed with aluminum soffit. The soffit was at an angle.
We would have added gutters, but when the soffit was added, it was boxed in and would have had to rip it all off which would
